Ducati 888 superbike 4Lt Motul 300V Factory Line Road Racing Engine Oil

The 888 can use a variety of motor oil grades, including 10W-40, 15W-50, and 5W-40

MOTUL 300V 4T Factory Line Road Racing a 4-Stroke motorcycle racing lubricant developed for Factory Teams.

4-stroke high-performance engine oil developed for racing use by factory teams.

  MOTUL has created a perfect synergy dedicated to the engine, the gearbox and the clutch.

Fully synthetic - ESTER Core® technology.

300V Factory Line engine oil utilizes the benefits of ESTER Core® technology for maximum power output without compromising on reliability and wear.
With the selection of special synthetic esters and the combination of an innovative additive package, MOTUL achieves the perfect synergy in terms of engine, transmission and clutch.

• Exceeds the requirements of JASO & API
• JALOS - wet clutch compatibility tested according to JASO T903:2023, level MA2 (JASO MA friction requirements)
• Oil film stability, optimum adhesion, high temperature resistance for optimum wear protection.
• Very high pressure absorption capacity guarantees maximum lubrication reliability even in extreme temperature ranges.
• For modern engine technology with wet clutch and gearbox lubrication in the same oil bath. No clutch sticking and slipping.
• Fastest oiling right from the start phase reduces critical cold start wear and guarantees a long engine life.
• High viscosity 15W-50 compensates for unburned fuel and allows smooth shifting at high operating temperatures.

Applications:

Motorcycle, ATV / UTV / SxS, PWC.

Recommendations / Notes:

• Change interval according to the specifications of the vehicle manufacturer / tuner or adapted according to operating conditions.
• Before use, always observe the service documents and recommendations of the manufacturer/tuner!
• Mixing with other synthetic or mineral lubricants is possible, but not recommended for optimum performance.

Properties:

Color Visual green / yellow fluorescent
Viscosity 15W-50
Density at 20°C ASTM D1298 0.869
Viscosity at 40°C ASTM D445 119.0 mm²/s 
Viscosity at 100°C ASTM D445 18.1 mm²/s
HTHS viscosity at 150°C ASTM D4741 5.5 mPa.s
Viscosity index ASTM D2270 171.0
Pour point ASTM D97 -45.0 °C / -49.0 °F
TBN ASTM D2896 8.4 mg KOH/g
Flash point A ASTM D92 222.0 °C / 432.0 °F