WEST AUSTRALIA & NORTHERN TERRITORY DELIVERY 

KANEG Evo II

Roadbike Motorcycle

Trailer Mate Motorcycle transport Stand Front or Rear Tyre/Wheel Chock & Secure Grip Lock

Trailer and Van and Ute, Motorcycle transport stand.

The kaneg Trailer Mate has to be the best Wheel Locking transport stand available in Australia.

Must be the easiest stand to assemble and is a universal fit for most Motorcycles.

Just bolt secure the mate to a solid base and roll the Wheel into the swivelling cradle.

Once you use the KANEG Trailer Mate you will wonder how you got along without it!

Cradle Interlock System

The interlock has to be the most innovation system to secure the Tyre/Wheel

Roll your pride and joy (depending upon the tyre size either the front or rear) into the stand Cradle,

as the Cradle pivots with the bike momentum the cradle interlocking fingers grip onto the tyre side wall.

When the bike is fully into place the Tyre is secured by the cradle and the top wheel retained by the Hinged Flange.

Please note: Very small and oversize tyres may not fully lock into the cradle, if this is your motorcycle, Front & Rear Ratchet Tie Down Straps must be used to secure your Motorcycle.

The Hinged Post Flange

Keeps the front wheel vertical.

The EVO II Flange is a hinged and swivel flange and suits most tyre diameters.

The EVO has a Tall Post with a Fixed Flange

Secondary Lock.

Once the bike is in place the cradle has a secondary manual lock clasp to secure the cradle.

Fork Seal Saver.

Save your seals! Once the front wheel is locked in place depending upon the tyre size there may be no need to tie down the front thereby saving the fork seals as they will not need to be compressed in transit.

If your tyre size isn't locked securely into the cradle 4 x Ratchet Straps must be used to secure your Ride.

Workshop Use  

The Mate is great for workshops and as a parking and storage stand.

Four rubber support pads provide a secure grip on most surfaces

If you intend to use the Mate in a Garage, we supply Dynabolts to secure the stand to the concrete floor.

Bike Security

Anti-Theft, Anti-Tamper & Security Nuts

We can also supply Security Nuts, for a permanent or removable fixing to secure the Mate to the floor.

Once the Mate is secured to the slab, the bike be chained to the Trailer Mate.

Just tighten down the Anti-Theft Nuts (Anti Tamper) (Security) with the Special Nut setting Tool and the stand is lock fixed to the garage floor.

2 piece locking bolts

Checkout our proprietary 2 piece locking bolts, the base bolt stays in place and the top bolt can be removed to release the Trailer Mate

and saves you the time and cost of stuffing about trying to locate a decent bolt.