WEST AUSTRALIA & NORTHERN TERRITORY DELIVERY

KANEG EVO

Dirtbike - MX

 Trailer Mate Evo: 

Fixed Head and Pivoted Secure Locking Wheel Cradle  

Wheel Chock Transport Stand

Trailer and Van and Ute, Motorcycle transport stand.

Behind the Kaneg Trailer Mate EVO II, the EVO has to be the best Wheel Locking transport stand available in Australia.

Easiest stand to assemble and is a universal fit for most Motorcycles.

Just bolt secure the Mate to a solid base and roll the front wheel into the swivelling cradle.

Once you use the KANEG Trailer Mate you will wonder how you got along without it!

Cradle Interlock System

The interlock has to be the most innovation system to secure the front wheel

Roll your pride and joy wheel (depending upon the tyre size either the front or rear)  into the stand Cradle,

as the Cradle pivots with the bike momentum the cradle interlocking fingers grip onto the tyre side wall.

When the bike is fully into place the Tyre is secured by the cradle and the top wheel retained by the Fixed Post Flange.

The Post Flange

Keeps the front wheel vertical.

The Flange is fixed and suits most tyre diameters.

Secondary Lock.

Once the bike is in place the cradle has a secondary manual lock clasp to secure the cradle.

Fork Seal Saver.

Save your seals! Once the front wheel is locked in place depending upon the tyre size there may be no need to tie down the front thereby saving the fork seals as they will not need to be compressed in transit.

If your tyre size doesn't locked securely into the cradle, ratchet straps are necessary.

Kaneg's 2 piece locking bolts

We design our 2 Piece - Lock Nut Kit so as to allow for backing plates (not supplied) to reinforce the floor against pull out.

Workshop Use  

The Mate is great for workshops and as a parking and storage stand.

Four rubber support pads provide a secure grip on most surfaces

If you intend to use the Mate in a Garage, we supply Dynabolts to secure the stand to the concrete floor.

Bike Security

Anti-Theft, Anti-Tamper & Security Nuts

We can also supply Security Nuts, for a permanent or removable fixing to secure the Mate to the floor.

Once the Mate is secured to the slab, the bike be chained to the Trailer Mate.

Just tighten down the Anti-Theft Nuts (Anti Tamper) (Security) with the Special Nut setting Tool and the stand is lock fixed to the garage floor.