Kaneg Stainless Steel Rear Stand & Alloy Spools

These stands have features not available in standard stands and once you see the kaneg SS Stands you will know you have purchased a work of Art.

When only the best will do, kaneg’s Professional Quality Stainless Steel Sport Bike Stands, are for the discerning Motorcyclist that demands better from their products.

 Since 2006 Kaneg has been proudly serving the Motorcycle Racer, Rider and Enthusiast alike.

 Contact us at: sales@kaneg.com.au Or for a pickup visit us at 8/51 York Road Penrith 2750.

 For other products visit our website: kaneg motorcycle accessories

 For further information, please phone:

 Phil on 0414968949

 OR

Rhys on 0414712419

SS or painted? Straight up I would pick a SS set over painted, 

Originally only Painted mild steel Tube was used to manufacture Motorcycle Pit Stands, now kaneg has raised the bar by introducing our Stainless Steel Stands.

There are many unique benefits associated with Your kaneg stainless steel Stands, like:

A greater resistance to stains and corrosion and unlike painted mild steel will not chip, scratch, fade or deteriorate.

SS will always look good and after a clean & polish with SS cleaner will look new again.

 SPECIFICATIONS.

Stainless Steel offers a more durable and low maintenance stand compared to mild steel and offers the least expensive choice in a life cycle cost comparison.

Stainless Steel 38mm Diameter x 1.5mm wall thickness Tube, with a greater strength-to-weight ratio over mild steel Stands.

The wheels are the best on the market, with Stainless Steel Miniature roller Bearings, the bearings are pre-lubricated and sealed for a long life.

The Large diameter 145mm Mars Rover TPU Wheels offers a greater level of stability and ease of use over standard wheels.

Fully Adjustable for Height, to achieve stability or an optimal bike height.

An adjustable height, maybe not always needed, but if the bike is on the track the adjustment allows a better warmer clearance above floor level.

Universal fitment:

 Rear stand with V spool pickups.

 Front Stand with cushion under calliper pickups.

Very easy hand operation with large stable wheels.

The Adapters are rubber coated to prevent scratching using the lift

Paddock stands or Pit stands are used to securely suspend the motorcycle for maintenance with both wheels off the ground.

 When suspended, the Motorcycle fully is secure and stable allowing for cleaning and maintenance and wheel removal without concern the motorbike will be unstable.

These stands also allows for tyre warmers to be fitted and removed simply and quickly.

Front stands should only be used engaging the rear stand to support the motorcycle.

Lifting and lowering the front or rear wheel assembly is an easy single-handed operation.

KANEG MOTORCYCLE RACE STANDS:

Thank-you for your purchase of our paddock stands, when using our product please note;

 You shall need a Torque wrench, Allen key + ring spanner or socket to assemble the stand + lock tight for the stand hook bolts.

 Tighten all bolts & nuts; All bolts and screws must be tightened to the following torques:

    M8   Screw   = 30 Nm

    M10 Screw   = 45 Nm

    M12 Screw = 60 Nm

Before securing the Stand Bolts/Bolts & Nuts, check measure the pickup width to ensure the correct pickup width; then apply a smear of thread lock to the bolts and tighten.

Only use these stands to support a motorcycle on a hard and level surface.

Never use a Front Stand without first having the KANEG rear stand engaged to support the motorcycle.

 Do not sit on the motorcycle whilst the bike is supported by any stand.

 Monthly check-tighten all bolts and nuts.